ETS traps

Topics relating to construction or maintenance of your loft, boxes and pigeon equipment.
Post Reply
Starter46
Posts: 153
Joined: September 24th, 2017, 12:10 am
Location: Wirral
Gender: Male - Male

ETS traps

Post by Starter46 » November 12th, 2017, 7:49 pm

Am I right in thinking when making a ets trap the pad has to be in side the loft so once birds come through bobs they'll walk over ets pad to be timed .?

User avatar
devo56
Posts: 4046
Joined: January 3rd, 2016, 11:12 am
Gender: Male - Male

Re: ETS traps

Post by devo56 » November 12th, 2017, 7:52 pm

Yes mate inside the loft, are you going to make them or buy them.?

Starter46
Posts: 153
Joined: September 24th, 2017, 12:10 am
Location: Wirral
Gender: Male - Male

Re: ETS traps

Post by Starter46 » November 12th, 2017, 7:58 pm

Will make them myself bobs on the front with a shelf on hinges for the pad to fold up on the bobs when not in use on the inside of loft . Now I no where the pad goes ... Cheers

User avatar
devo56
Posts: 4046
Joined: January 3rd, 2016, 11:12 am
Gender: Male - Male

Re: ETS traps

Post by devo56 » November 12th, 2017, 8:01 pm

Starter46 wrote:
November 12th, 2017, 7:58 pm
Will make them myself bobs on the front with a shelf on hinges for the pad to fold up on the bobs when not in use on the inside of loft . Now I no where the pad goes ... Cheers
Sounds Good mate, It will save you a few bob Mark.

User avatar
trench
Posts: 3170
Joined: October 30th, 2016, 9:55 pm
Location: West sussex
Gender: Male - Male

Re: ETS traps

Post by trench » November 12th, 2017, 8:26 pm

Starter46 wrote:
November 12th, 2017, 7:58 pm
Will make them myself bobs on the front with a shelf on hinges for the pad to fold up on the bobs when not in use on the inside of loft . Now I no where the pad goes ... Cheers
Well done mate, good luck with it all.

User avatar
Andy123
Posts: 3034
Joined: October 15th, 2016, 8:15 pm
Location: Wincanton, Somerset
Gender: Male - Male

Re: ETS traps

Post by Andy123 » November 12th, 2017, 8:27 pm

C38338CE-9EC4-4846-9567-C238A29E3A09.jpeg
70933546-FF47-4398-88F5-2AA4927A5D2F.jpeg
This is my ets starter46. The pad is inside the wooden box which can be slipped in and out. As you can see they have to come through the bobs and stand on the pad.
You do not have the required permissions to view the files attached to this post.

Starter46
Posts: 153
Joined: September 24th, 2017, 12:10 am
Location: Wirral
Gender: Male - Male

Re: ETS traps

Post by Starter46 » November 12th, 2017, 8:59 pm

That's the idea I have with the box on hinges so it folds up over the bobs .. Cheers

Post Reply

Return to “Lofts, Fixtures & Fittings”

Who is online

Users browsing this forum: No registered users and 1 guest